assuming you are serious, I will be!
drain the oil
take the fuel tank off
take the battery out if it has one
turn the whole bike upside down (trust me)
(if the hole has threads in it something has fallen out- remedy this)
wipe the hole with thinners then sand the paint from around the hole with 180 grit wet and dry sandpaper.
follow the instructions on a tube of sellys "kneed it"
equal or equivalent.
apply this over the hole and let it set / harden for 24 hours-- don't follow the instructions here, follow mine, 24 hours minimum.
if you removed all the dirt and oil from around your engines hole the repair will work. things wiil not stick to oil, so I can not stress enough to clean the area around the hole thoroughly.
good luck
jkwobble brisbane
October 2008