Recent: Safely remove screen protector from a Macbook Air?

Mend > Car Alarm Systems

Mend Vauxhall Tigra Alarm Fault Mins

what is wrong with my tigra?

what is wrong with my tigra? the alarm has a fault i have to sit and wait 3 mins for the indicators tom stop flashing after i have opened it

colin
July 2008
thank you brian your advice was spot on. top man
colin

colin
August 2008
First thing to do is re-sync the remote.
1/ Make sure the doors, tailgate, bonnet and fuel filler cover are properly closed.
2/ Get in the car.
3/ Lock the doors by pushing down the door knobs.
4/ Turn ignition on (i.e. dashboard lights on but don't start engine).
5/ Push the unlock button on the fob. Doors should unlock.
6/ Turn ignition off, remove key, get out of the car and close the door.
7/ Lock using the remote, wait a few seconds then unlock with the remote. The alarm should now be back to normal.
This method has always worked for me, but if it doesn't on your car an alternative is to ignore step 3, and at step 5 press both buttons on the remote at the same time.

Brian.J.
July 2008
hi brian, openning it with the key, as the fob stopped working, although it has new batteries, and stll lights up, yes i have tried the spare key, any ideas? colin

colin
July 2008
Are you opening it with the remote or by using the key in the door?
Does the car start O.K.?
Have you tried the spare key?

Brian.J.
July 2008

Related Questions ...

Mend alarm wrong going
11

Scrantronic alarm gone wrong?

Hi, we had a bF fault on our 9827 scantronic system. The internal alarm was going off every 30 mins. I tried p... [Read more]
Mend alarm security system battery fault
7

How can I turn my scan tropic alarm off?

I have a scantronic 9827 alarm showing bF (battery fault) the internal alarm keeps going off every 45 mins and... [Read more]
Mend pollution start engine
1

Catalytic Convertor Fault/Anti Pollution etc?

Hi, got a 307 xsi, had a cold start to the morning here, engine spluttered and took a few attempts to start it... [Read more]
Mend alarm system fault
3

Fault with Scantronic 9752 (Cant stop alarm after setting off alarm)?

Hi, I have a scantronic 9752 and when the alarm is tripped by any means I can reset the control panel but can... [Read more]
Mend scantronic battery reset
2

Scantronic 9800: Changed battery. Now wants remote reset?

Had a bF code on our alarm this morning - usually inputting our customer code clears this and the internal sir... [Read more]
Mend fridge freezer defrost compressor
2

Zanussi Low temp alarm every 15 mins BUT temp. OK?

My 7 year old Zanussi ZX97/5 or 99/5 frost free fridge freezer low temp alarm goes off around every 15 - 30 mi... [Read more]
Mend fault control panel power cut
2

Alarm not working after power cut Veritas R8?

The power was off for 8hrs. For the first 20 mins the internal buzzer sounded then went off on the timer. This... [Read more]
Mend alarm fault set
1

my acenta alarm beeps every 2 to 3 mins.what can i do to rectify this?

my home alarm has got a fault which causes it to beep if it is not set the alarm is an acenta.any ideas?
Mend security system alarm fault
1

Scantronic 9448 Faulty following severe HV voltage drop?

My Scantronic 9448 Control Panel (Approx 15 yrs old), no previous problems, developed a fault during a voltage... [Read more]
Mend vauxhall alarm going
2

vauxhall zafira?

I have an 02 zafira and the alarm keeps on going off i have diconnected the ultrasonics in the courtesy light ... [Read more]
Mend going 15 mins
1

How can I stop Alarm Going off Every 15 mins on BMW520i 1991cc?

Alarm keeps going off every 15 mins how Is it a fault on alarm
Mend dishwasher draining pump
2

zanussi des 959 AL6 ALARM?

CAN ANYONE HELP ? IVE A ZANUSSI DES 959 WHICH KEEPS ALARMING AT 20 MINS INTO THE CYCLE AL6 WHICH IS WILL NOT D... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Car Alarm Systems ...

Related Categories

Mend Home Alarm Systems
Home Alarm Systems