Recent: How to Fix Hitachi DZ-MV550A Error Code 2881 | Guide

Mend > Washing Machines

Mend Zanussi IZ16 Cycle Error

My zanussi iz16 stops during the cycle?

My zanussi iz16 will stop during a cycle and go back to the start of the programme ie 1:03 in the digital display window. Changing the temp makes little or no difference. This does not always happen and occassionally it will continue to the end of the cycle

yvonne hunter
July 2004
Try to check the heater in the drum, it could be open-circuit, or the voltage supply to the heater from the printed circuit board.
Good luck.

Robin Yim
December 2004

Automatic Answer

We may have found other answers which could help you.

Click here for Zanussi Cycle Error

Related Questions ...

Mend washing machine error code wont start
1

ZWI 2125, start light flashes but wont start?

HI Run a programme the other day and half way through filling the water the cycle stopped and the start light... [Read more]
Mend washing machine drain pump error e20
3

How to remove drain pump from Zanussi WJS 1665W?

On dryer cycle I'm getting slight rattling followed by error E20. Detailed instructions on removing the pump ... [Read more]
Mend heating element heat wash
1

zwd14581 won't dry?

Hi, our Zanussi ZWD14581S won't dry anymore. All other functions seem ok. Is it just the heating element? I... [Read more]
Mend washer/dryer drain error
1

How can I fix a Zanussi Washer/Dryer Model: WJD1270W?

When I set the machine to wash (any cycle), it fills with water, the water jet starts, the machine takes the s... [Read more]
Mend washing machine error code zanussi
1

zanussi jetstream 1200 xc model fjs1225w?

the machine shows on error code E90 part way through the cycle it is a zanussi jetstream 1200 xc washing machi... [Read more]
Mend complete cycle cycles
3

zanusi progress 1600 6kg wont complete cycle?

my zanusi progress 1600 6kg stops before completing its cycles no error shown, help.
Mend washing machine error code door locked
1

Zanussi Jetstream 1400 - E40 error code flashing? Cant open door ?

Zanussi Jetstream 1400 - E40 error code flashing? Load of washing in and 56mins to go and this error code c... [Read more]
Mend washing machine error code zanussi
1

Anyone know what error code e240 is on zanussi ecovalve 1200 xc6?

6 mins from the end of the cycle this message pops up - any ideas. Is on the rinse cycle. Thanks
Mend washing machine fault programmer
1

My Zanussi aqua cycle 110 FS1155 wont start?

My washing machine wont start on pressing start button. It clicks clicks again and green light goes from washi... [Read more]
Mend e20 error zanussi w
1

E20 Error on my Zanussi ZWF 16581 W?

My Zanussi washing machine had an E20 error come up but the water drained OK but didnt go onto the spin cycle.... [Read more]
Mend washing machine error codes timer
1

Zanussi ZKI245 resets mid wash?

Hello, I have a Zanussi ZKI 245 Washer-Dryer and it sometimes resets mid wash. We program it to start and i... [Read more]
Mend zanussi wjd w
1

Zanussi washerdryer WJD 1667 W?

Machine set for 1.54 cycle. got to the last 18 minutes and flashed up error 90. No such error in the manual - ... [Read more]
Mend washing machine error code zanussi
1

My Zanussi Jetsystem 1200XC keeps coming up with the E10 fault. ?

The filters are clean and the water supply is OK. When the drying cycle starts the water runs for a short per... [Read more]
Mend washing machine displaying
1

How can I fix a Zanussi Jetsystem 1400 washing machine displaying error E40?

The machine stopped in a middle of a cycle for no reason. Now whenever I try to start a cycle after a minute i... [Read more]
Mend washing machine error code motor
1

Zanussi FLE1115W stops,?

Washer stops, sometimes after wash cycle and sometimes during rinse cycle. By restarting and skipping complete... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...