when my epsom says "maintenance is required" what can I do?

You have to clean or renew the ink pads at the back of the printer after removing the cover - these are the parts that need maintenance !
There is a counter program inside the printer and when it reaches 8300, the printer will not work and this is when you get the maintenance required message...
You have to reset the counter before the printer will work OK again and this is what the software does - downlaod it from here... cheaper than taking it to an Epsom dealer then be
pursuaded to buy a new printer... http://www.ianwillis.co.uk/c42/

Mark Stubbs
March 2007

try http://www.ianwillis.co.uk/c42/ and if you need to go to and thttp://www.ssclg.com/epsone.shtml here is is a list of all printers hope this helps

p bainbridge
January 2007

Go to ssclg.com download the free software worked for me

mark
December 2006

Hi, apparenlty there is a free software programme available. I'm
not sure where from, but I do know that it can be obtained on
*Bay for a small fee (less than £1) that will supposedly help with you computer service problem.

Chris
November 2005