Epson Stylus Photo 750 shows ALL lights flashing?

April 2nd 2011
worked for my 1999'er (12 year old!) stylus 750 photo too! thanks!
(Keeping old hardware in use helps preserving environment)

hervé
April 2011

Excellent. Many thanks... much more help than the manual
Fixed by Stylus Photo 750... Although it was the "Cleaning" button I had to hold not the “Lead/Eject”.

Many thanks

Ian Taylor
January 2010

Ian Taylor
January 2010

This cured my ailing 750, thanks a million I can cancel my cheque for the new one I was about to purchase.
Mac

Kiteman
September 2009

I have an Epson Stylus Photo RX5000 with the ERROR, Printer error . the light came on when I was cleaning the heads. i was told clean the spong and let dry and it will be ok. I still have the error after restarting the printer. can this be reset?

toni from cali
September 2009

Hello,

This worked for my Photo Stylus 1200.

Thank you.

Peter
May 2009

Thanks, this also worked for my 760.
M Shaw

M Shaw
June 2008

The printer is "de-programmed" and can be reset to "Out of the box" factory default settings by following these six steps:
1. Turn printer off.
2. Press and hold both the "Load/Eject" and the "Cleaning" buttons.
3. While holding these two buttons, turn the power back on and continue to hold.
4. Count five seconds.
5. Release the two buttons and then press and hold just the "Load/Eject" button (withe some models of the E750 the necessary button may be the "Cleaning" button).
6. Continue to hold "Load/Eject" (or "Cleaning" respectively, see step 5) until printer's lights flash, then release button.
Printer should now be reset and the "Hidden Counter" of which's existance conspiracists pretend to know is set to zero again.

Cooper-Bristol
June 2008