Recent: Home max fs506x?

Mend > Lawn Mowers

Mend John Deere 68 Model Mower

john deere model 68 rear engine riding mower!?

i just bought a john deere model 68 rider the wiring is all jacked up i have been trying to find some wiring schematics with no luck. the model number on the motor {briggs and stratton} 19170 type 242601 code 88092009 any help with this would be very helpful. I think it was built around 1976.

Travis Gonzales
April 2008
my 68 mower will go forward and back properly and then just stop moving. After moving the tractor around it will work again. any sugestions?

jerry
May 2012
I also would like a wiring diagram for JD68. I can not believe that JD does not have info on service on these older mowers. Thanks!

JoAnne
August 2009
for a fuel tank take one off another riding mower or push mower make sure the hose will work with whatever gas tank you use.

ricky schroeder
July 2009
Good luck, my John Deere model 68 is only good as a yard ornament now because I cannot find a fuel tank.

T-man
July 2009
got to this address and type in the model number (68)
and from there you should be able to find the wiring harness. Hope this Helps.

http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt

rexter1@excite.com
August 2008
I would be interested in that wiring diagram too. Dead battery problems. How does the generator work?

WW
May 2008
I have an old 68 rider, can send you a schemadic drawing via snail mail. I by passed the seat safety device when I recovered the seat.

john
April 2008

Related Questions ...

Mend belt john deer
1

How to replace a belt on a john deer riding mower,model 111 ?

I have a john deer riding mower,and i need to know how to replace the belt on the bottom where the grass cutte... [Read more]
Mend riding mower no start ignition
2

john deere riding mower model L111?

will not start. checked battery - it is ok. I replaced the keypad ignition. will not even click when i turn th... [Read more]
Mend model mower bought
3

no reverse on model 68 rideing mower?

i have just bought a 68 john deere rideing mover it dose not have any reverse gear wondering what i have to do... [Read more]
Mend John Deere Mower Deck
1

I need the same thing? I have a Sabre mower built by john deere model 1542G?

I need the same thing? I have a Sabre mower built by john deere model 1542G and can't find a routing diagram. ... [Read more]
Mend diagram mower model
1

transmission diagram?

I need a diagram of a hydrastatic transmission for a john deere lawn mower model L111 to see if I have assembl... [Read more]
Mend belt deere mower
2

How do i change a belt for a 68 model John Deere rider mower?

i have no mannual to follow. i have removed the left deck guard already. How would i remove the right deck gua... [Read more]
Mend pto john deere
1

How do I remove the pto clutch on my John Deere 160 lawn tractor?

How do I remove the pto clutch on my John Deere 160 lawn tractor? This mower is a 1985 or 86 model.
Mend john model working
3

john deere model 185--starter motor stopped working?

John deere model 185, 46 inch mower, hydostatic, kawasaki fc540v 17hp engine won't turn over when switch is ac... [Read more]
Mend john deere manual
1

Anyone got an operator manual for Sabre (John Deere) RG1028 ride-on mower ?

I've recently purchased a Sabre (John Deere) RG1028 ride-on mower, but didn't get an operators manual with it.... [Read more]
Mend John Deere Lawn Mower Deck Belt
1

John Deere lawn mower Model L130 48" cut?

I was wondering if you could tell me where the spring (GX21582} goes at on the deck? I know where it connects ... [Read more]
Mend engine carburetor briggs & stratton
3

Briggs & Straton engine will not run?

I own a older lawn mower with a briggs & straton 16hp engine. Model 402707 type: 1212 01. The engine will st... [Read more]
Mend John Deere Drive Belt Mower Deck
1

Drive belt path for John Deere Model 160?

I need info on how to install the drive belt on a Model 160 JOhn Deere Lawn Tractor. This is a 38 inch/two b... [Read more]
Mend John Deere L130 Mower Belt
2

John Deere L130 Belt fell off and am trying to find pattern to putback on?

Jon Deere L130 mower deck belt fell off and am trying to find the pattern or routing picture to put back on. I... [Read more]
Mend replace mower help
2

Can I get a diagram of how to replace the belt on a John Deere Sabre mower?

I have the belt, but need to see a diagram of what it looks like when on correctly. Can you help? The mower ... [Read more]
Mend lawn mower engine carburetor
1

I have an old John Deere 111 that had a 12 hp briggs engine model 281707?

type 0198-01 code 89022411. This motor has one wire coming from the alt and no wires coming from the bottom o... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Lawn Mowers ...