5 hours ago: Ge tfx30pr?

Mend > Washing Machines

Mend Zanussi WDT1085 Machine Replace

How I do I change the on/off switch of a Zanussi WDT1085 washing machine?

My on/off button of my Zanussi WDT1085 washing machine seems to be stuck. How can I get to it and replace it and from where can I get a new switch and how do I install it?

Paul Tonks
April 2008
take lid off and you will see switch behind on/off button.make sure button and fascia are clean as this will stop button sliding freely.freeing oil will help.if switch needs replacing prise it out away from frame at back using a large flat bladed screwdriver and then spread on/off button mountings to release switch shaft from button

ck
April 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Zanussi Machine Replace

Related Questions ...

Mend zanussi washing machine noise
1

motor replacement on zanussi zwd12270s?

when we use our washing machine there is a strange noise when the drum spins, its almost as if there are arcin... [Read more]
Mend control unit machine
1

Replacing Timer Control unit on a Zanussi FJS1197W washing machine?

I have a faulty Timer Control on a Zanussi FLS1197w washing machine (for which I have a spare part) and remove... [Read more]
Mend replace waste pipe
1

replace waste pipe?

does anyone know how to replace waste pipe in a zanussi wdt1085 washer/dryer? do you turn machine on side to g... [Read more]
Mend zanussi front making
1

Zanussi Aquacycle 1200 - FLE1216W?

The rubber inside the front door has turned and is making the machine make noises, is there a way to replace t... [Read more]
Mend carbon brushes washing machine Zanussi
1

how do I replace carbon brushes?

Zanussi Nexus washing machine - carbon brushes need replaced, but i can't get the back off the machine
Mend zanussi machine rest
1

How to replace door handle on Zanussi FLS1383W?

How do I replace the door handle on my Zabussi FLS1383 W machine. Rest of parts are intact/
Mend washing machine replacement PCB
1

Zanussi iz12 pcb replacement?

I have already replaced the door lock mechanism but the m/c still not working properly which pcb do I need to ... [Read more]
Mend washing machine bearings loud noise
1

Repair Zanussi Aquacycle 1100 XC?

How do I remove bearings from Zanussi Aquacycle 1100 XC (extra capasity) to replace with new as machine loud g... [Read more]
Mend washing machine zanussi
2

Washing machine leak?

I have a Zanussi ZWD 16270 W1 washer/drier that has a leak. Water drips from what seems to be the area around ... [Read more]
Mend washer pump blockages
3

Zanussi WJS1665W - does the Drain Pump need replacing?

Hello. We have had our Zanussi Washer / Dryer for over 10 years now. I clean the front filter on a regular... [Read more]
Mend set water hotter
1

zanissi aquacycle 1500?

machine set at 40 degrees but water temp is much hotter. how do I replace the thermostat
Mend washing machine door seal replacement
2

How to replace a washing machine door seal on a Zanussi washer?

I would like to know how I can change the door seal for the Zanussi Aquacycle 1000.
Mend machine switched pressure
2

No cold water entering the machine (Zanussi WDT 1085) when switched on?

Although water is at correct pressure and is proven to be there at the entry tube to the rear of the machine, ... [Read more]
Mend washing machine replacement heating element
1

how can i replace a heating element?

Zanussi jetsystem washing machine. Modle no IZ12.Serial no 53100025. Prod no 914513004/01
Mend washing machine bearings drum assembly
2

Replacing bearings in a zanussi F1245W Washing Machine?

I wish to replace the bearings in my Zanussi F1245W Washing Machine and would like to know how to gain access ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...