Hi
I just had a radiator replaced and now the reading on my pressure guage is hovering between 2.5 and 3.5. It seems to get higher when the hot tap is turned on in addition to the heating. The boiler isn't showing an error message. Is this situation ok or should I try to get it back to normal pressure? If so how?
Thanks if you can help.
my baxi 105e sits at 1.5bar no problem but when asked for ch pressure increases and blows off at 2.5 bar what can be causing this
pawbroon
September 2008
Bleed the radiator - this should reduce the pressure. Combi boilers should be at about 0.5-1.5 pressure. Pressure increases when hot water/heating requested.
howtomendit.com for free repair help, information and advice.
