Recent: Home max fs506x?

Mend > Washing Machines

Mend Kenmore Elite Front Loading Washer

Towels smell after using them once or twice in Kenmore Elite?

The towels smell after using them once or twice when using my front loading Kenmore Elite Washer. Any suggestions? I've used the correct amount of detergent.

Joanne
June 2005
If stuff smells after coming out the washing machine its usually because theres stagnant water lying in the drum. This is caused by water falling back down drainhose because its not getn pumped out properly due to faulty pump or usually caused by ppl not having the bend in the hose high enough before entering the sink trap. This also allows dishwaterwater that drains from ur sink to creep back down the hose and lay in the drum- hence the smell. Just make sure that when machine is fully in, the hose goes straight up then goes through the cupboard next to it(usual setup). Ensure that the area where the w/m drainhose is connected to sinktrap is higher than the opposite drain run from the same trap so that when dishwater drains theres no build-up falling back towards the machine drainhose(it drains towards outside first before it can get a chance to go towards machine). Its also worthwhile checking the actual drain pipe run towards the outside stack to make sure that the run gradient complies with British Standards, ensuring wastewater drains quickly enough. I hope that this is helpfull,any further advice then can email me at m.okane@hotmail.co.uk.

Mark
June 2007
My towels smell as well. I never linked this directly to the washer. I wash mine on the "heavy duty" cycle, but this doesn't help. Maybe I'll try a smaller load.

Misty
July 2005
I have the same problem. The only thing i could come up with is, to put in only a 1/2 or 1/4 load. Seems wastefull but nothing else helped. I think the amount of water used by the maschine is too low.

Monika
June 2005

Related Questions ...

Mend washer leak washing machine
1

My kenmore washer is leaking from the left front. what can be wrong?

My kenmore top loading washer is leaking during the fill cycle.
Mend front loading washer
1

installing belt to kenmore front loading washer?

My belt was off the drum in the rear of the washer when I opened it up and now i am having trouble re-installi... [Read more]
Mend remove door seal
1

Remove door seal?

How do you remove the door seal on the Kenmore Elite front loading washer, model number 110 42924 201?
Mend front loading machine
2

HOW DO I GET THE SMELL OUT OF MY FRONT LOADING WASHER?

HOW DO I GET THE SMELL OUT OF MY FRONT LOADING WASHING MACHINE? IT SEEMS TO BE DAMP ALL THE TIME CAUSING A M... [Read more]
Mend kenmore front washer
1

kenmore, front loading washer?

Just moved into a new house. The washer was left with the home. The is a terrible musty smell from the washe... [Read more]
Mend washer kenmore front loading
1

My kenmore he3t front loading washer won't start?

How do I get my kenmore he3t front loading washer to start. It has power, but won't run any cycles.
Mend front washer dry
1

My kenmore front loading washer won't spin dry?

My kenmore front load washer ( 3years old ) will not go into spin mode. Instead a loud clicking noise (simila... [Read more]
Mend Kenmore Washer Leaking
4

leaking kenmore washer?

I have a front loading kenmore model number 417.41142000 It is leaking from what appears to be a two piece pl... [Read more]
Mend machine f02 code
29

Kenmore HE3t Wash Machine "F02" fault code?

We have a two-year-old Kenmore HE3t high-capacity front-loading washer. It has started malfunctioning. It st... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...