How can I fix my hotpoint ultima wd71?

if connected to sink u bend raise the height of the pipe between the u bend and the washer to prevent back siphoning out of the sink into the washer. If you are connected to a stand pipe check inlet solenoid valve rubber is seating. change the whole solenoid unit. If hot and cold fill are both used turn off one of the taps see if the machine fills y/n then turn the first tap back on and the other off see if machine fills we are doing this to test BOTH solenoids (the hot and the cold) ignore this test if you ONLY have a cold fill going in

wirecutterman
February 2008