Replaced door seal but it still drips on Hoover WDM120?

I had this problem on same model. It looked like a leak from the door seal, but was actually leaking from the detergent tray, down and running around the door. A friend of mine who is a plumber suggested turning the water pressure down slightly via the main stop-cock or check valve on the water supply to the machine (to stop it rushing into the detergent tray) and checking that the machine is level.
I did both of these and the leak stopped.

C Martin
March 2008

Check out the sump hoses, thermostat and heater seals for splits etc. Check the pump and connection to the filter trap. Could also possibly be a leak through the main bearing seal - check for rusty spray pattern round the back of drum shaft. Check out www.2ndwave.co.uk/manual.html for more info

dan
January 2008