Recent: Will I need to replace my garden tap?

Mend > Washing Machines

Mend Hotpoint WMA32 Washer Cycle

MY HOTPOINT WMA32 WASHER WILL NOT SPIN ON WASH OR RINSE CYCLE?

MY WASHER WILL NOT SPIN IT TAKES WATER AND POWDER THEN DOES NOTHING ALSO PUT ON SPIN AND WATER EMPTIES BUT STILL DOES NOT SPIN BELT IS ON AS I HAVE CHECKED

BEVERLEY JOHNSON
November 2007
HotpointHotpoint WMA32Household Appliances, Washing MachinesWasher Cycle Hotpoint
As the machine is taking in water and draining, I would think the fault is likely to be motor or module related. If the drum is turning at the start of the programme then I would think that the speed module is faulty. Modules can sometimes not work correctly if the heating element is not working - if it doesn't reach temperature then the module does not kick in thus no spin (can you feel the water getting hot when you put your hand on the door?). However, if there is no drum movement at all then the problem is likely to be motor related.

vicky
November 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Washer Cycle Hotpoint

Related Questions ...

Mend washing machine hotpoint household appliances
2

Hotpiont bwm129?

Hi when iv put my washer on its not finishing the cycle it just keeps going im having to stop it and put it on... [Read more]
Mend hot point fault code
2

H20 hot point fault code ?

Hi, I have a fault code on an hotpoint WDPG 9640, code H20. The washer still completes the cycle but around... [Read more]
Mend washing machine Hotpoint cycle
3

Hot point ultimate WMD960?

Washer will wash but not empty and rinse or spin leaving washing wet and won't complete the cycle.
Mend washing machine fault cycle time
3

Programmer fault? Hotpoint WF860 1600 spin?

Hi guys, For the last few washes, I've noticed our washer starts increasing the cycle time, instead of decreas... [Read more]
Mend washing spin hotpoint
1

Washing bin will not spin?

I have a hotpoint extra large cap washer and after I had to rplace the water hoses and the drain tube (due to ... [Read more]
Mend appliance circuit current
1

Hotpoint WT960 blowing circuit breaker?

Hi, I had a problem with washer blowing the breaker during a cycle, once or maybe several times. Now I can't ... [Read more]
Mend washing machine error code hotpoint
1

What does F-08 mean on my Hotpoint Ulltima washing machine ?

My washer has stopped half way through a cycle and the code F- 08 has come up on the LCD display.
Mend washing machine error code drainage
1

Error code f05 on hotpoint ultima WMD967 washer?

After reading the online info I've seen that this refers to a blockage in the outlet so I've cleaned the pipes... [Read more]
Mend washing machine washer dryer flashing
1

Hotpoint WD440 Wont spin and drying light flashing?

I have a hotpoint WD440 washer/dryer today it has completed the wash cycle but it wont spin. The drum turns ar... [Read more]
Mend hotpoint washer cycle finished
1

why doesn't my hotpoint washer /dryer cool down when cylce is compete?

I have had a brand new hotpoint washer dryer. When the complete cycle is finished the macheine drum is very ho... [Read more]
Mend showing hotpoint washer
1

Fault F05 showing on hotpoint ultima wmd965 what do's it mean?

Washer stopped mid cycle and displayed ---F05 i have seen pump blocked coming up is this what the problem is a... [Read more]
Mend washing machine Hotpoint pump
2

How do I re-set my hotpoint WD420 washer? It is stuck on spin cycle?

My Hotpoint WD420 is stuck on spin cycle with the spin light on but will not spin. I have tried the Beko reset... [Read more]
Mend washing machine error Hotpoint
1

flashing display on my hotpoint wf840?

when I plug my washer into the mains socket and switch on I instantly see the display power up but then the po... [Read more]
Mend hotpoint washer drier
1

how can I fix hotpoint wdl 540 washer drier?

when in the drying cycle,it goes into spin cycle,all the controls are set correctly.
Mend washing machine Hotpoint fault
2

my hotpoint WF840 is showing a fault- F08- no manual!?

my washer - hotpoint WF840- is showling a fault in mid cycle- F-08- and will go no further- i have tried truni... [Read more]
Mend washing machine fault repair hotpoint

Hotpoint WD865A stopped mid wash. 8pin chip U2 blown its to?
Mend washing machine stuck door hotpoint ultima

Hotpoint Washing machine door stuck?
Mend washing machine repair door

How can i mend?
Mend washer dryer error code hotpoint

Washer dryer WD640 flashing H20 error?
Mend washing machine hotpoint spin

Hotpoint wt960?
Mend hotpoint washing machine

Twin Tub leaking?
Mend washing machine Hotpoint fault

Door sensor Hotpoint WMXTF 742?
Mend washing machine bearing replacement

Hotpoint wma34 bearing replacement?
Mend 1400 express water

Logixx 1400 express?
Mend cycle 1400 washing

How can you do spin only cycle on ultima 1400 washing machin?
Mend washing machine Hotpoint aquarius

Not starting until I bang door closed?
Mend washing machine repair belt

How can I change the belt on a Hotpoint Aquarius WF 640 wash?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...

Other models...

Hotpoint AquarisHotpoint WD63Hotpoint WD71Hotpoint WD71PHotpoint WF100Hotpoint WF430Hotpoint WF530PHotpoint WF620PHotpoint WF640Hotpoint WF860PHotpoint WF865Hotpoint WMA 32Hotpoint WMA 33Hotpoint WMA31Hotpoint WMA33Hotpoint WMA40Hotpoint WMA60Hotpoint WMD960PHotpoint WMF760Hotpoint WT721

Related Categories

Mend Knitting Machines
Knitting Machines
Mend Sewing Machines
Sewing Machines
Mend Stairlifts
Stairlifts
Mend Steam Cleaners
Steam Cleaners
Mend Steam Irons
Steam Irons
Mend Tumble Dryers
Tumble Dryers
Mend Vacuum Cleaners
Vacuum Cleaners

Topic

Hotpoint WMA32 Not Spinning - Fixes & Help