If you are competent and safe to do so, then follow other links on this site to check: 1) electrics 2)water pump. In my case, after following the checks, I found that the black steam pipe to the iron was clogged. So after disconnecting it from the steam generator end, I passed air by blowing through the tube. Others have somehow connected a bicycle pump to achieve the same result. Good luck and take care.
Trouser press Morphy Richards mode 49351 instructions?Do you have the manual for the morphy Richards 49351 trouser press...Click here for the fix.
steam generator iron?I need to replace the steam cable from my morphy Richards power steam elite as it has detached.
The question is where do I find a suitable screw driver as the screw are security type,...Click here for the fix.
morphy richards power steamelite ?Base is working. All lighting up. But iron not getting hot. Blue light not coming on on the iron itself. Any ideas guys?...Click here for the fix.
My Morphy Richards steam elite 330004 says empty of water when full?I fill the reservoir with water and switch the iron on and the blue light comes on indicating the reservoir is empty. The two white seals are in place as one of those has become stuck in the reservoir....Click here for how to mend it.
Morphy Richards power steam elite no steam?The reservoir is full of water but after done initial buzzing when you start it up, the "fill up" light flashes persistently to say it's empty. Please advise?...Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.