gas water heater Chaffoteaux britony 11t (geyser ) 11 years old?
The heater's burners will only come on when the temperature is set at the maximum. On all the other settings it will not fire, the water gets very hot and when I open the cold water on the shower mixer the water goes cold. The pilot lights up without any problem and stays on.
I have changed the diaphragm, the venturi and have cleaned the water governor, the water filter and the gas filter; but the problem is still the same.
The heater was ok last week.
Relight pilot.?I know this question has been asked in Sept 2017 but an answer wasn't given. I was wondering if I could continue with a very similar one?
I have a Chaffoteaux and Maury Britony combi SE. It is supplied by a 47kg propane gas bottle as I live off grid in UK. Sorry, but I don't know how old the...Click here for the fix.
How can I fix my boiler chaffoteaux&maury?The pilot light does not come on for the heat and hot water...Click here for the repair.
My boiler won't light but will when we take the cover off ?Chaffoteaux and maury won't light but will when we take the cover off but as soon as we put it back on it goes off again...Click here for how to mend it.
pressure relief valve?i have a chaffoteaux britony combi se80 boiler. i have water running out of the overflow pipe pressure drops and red light comes on ( shutdown ) ive been told its the pressure relief valve can you reset it or do you have to replace it
thanks dave...Click here for the repair.
chaffoteaux brittony combi se 80?my brittony combi SE 80
heating works fine when you turn hot tap on nothing happens does not ignite, water pressure ok...Click here for the repair.
Chaffoteaux Mx2 24 error 50?What could be the problem turn boiler on all works ok boiler ignites temp rises then boiler shuts down with error code 50 flashing (primary water flow defect) press reset and same happens again, cant draw hot water 1.7bar pressure on system although it had no pressure after returning from 2 week hol...Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.