20 years ago i had this alarm installed Accenta 6 i kept everything for the alarm from the box's to the manuals 3 years ago i noticed the red l.e.ds on my flashguard xl bell had started to flash rapidly the other night when parking my car on the drive i noticed the l.e.ds had completely gone out
When i set the alarm off the strobe and siren still work
Thanks pal will have a look this weekend and will get back to you
Eric Fisher September 2015
Have you worked with alarms before 'b'?
Worked with thousands of flashguards Eric especially the old range your talking about
Whats probably happend is the resistors for the l.e.ds have blown especially if they started flashing fast before die'ing out or the pcb has warped a tad its good that the strobe and siren are working but i do reccomend replacing or at least opening the bell box maybe give the pcb a push see if that gets them flashing
If all fails replace it with the new flashguard xl burglars would just think the alarm was dead
alarm goes off during night . no intruders?alarm system accenta/optima G3 intruder system.
Alarm goes off in the night for no reason.
Can anyone tell me why. Quite old model, perhaps
I need a battery change....Click here for how to mend it.
Honeywell Accenta Gen 4 - LCD Keypad - Power Light but not responding?We have an alarm system set up with a single Honeywell Accenta Gen 4 LCD keypad.
This has been working well for several years.
Today we came to disarm the alarm and when trying to enter the PIN nothing happened and the display was completely blank. The power light however was lit up red so th...Click here for the fix.
how to reset Lcd panel after power outage accenta G4 mini?When power was restored after an outage the LCD unit was displaying a line of black squares along the top of the display. The power and day lights are lit.The display does not respond to any input
Have tried using the user guide to set date/ time the display does not change from the black squares...Click here for the fix.
Blue light flashing on my accenta 6?HI we had a power cut and when the power went back on our Accenta 6 alarm went off.....we have the code so used it and the alarm went off. The problem is the blue light has continued to flash on the bell box and the tamper & power lights are permanently lit on the keypad. We have replaced the batter...Click here for the fix.
Accenta 8 alarm going off after power cut?Came on here looking for answers to switch off the alarm. I've seen a lot of thank you messages to some guy called Tom for giving the answer but NO answer.
We rent this place and I'm not interested in having an alarm at all. If someone (doesn't have to be tom ...Click here for how to mend it.
keypad not working on Accenta G3?Hi. I have accenta G3 alarm. The 0 and 9 buttons on keypad have stopped working as those two numbers form part of my user code I can no longer set my alarm. The alarm was installed in house when I moved in so have no idea of the installer....Click here for the fix.
how can i fix accenta 6 keypad?hi i have a accenta 6 alarm and the power light is flashing any idea how i can fix this please keypad does not work properly thanks...Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.