suprima 50?

you guessed it, my Potterton suprima 50 wont fire up, i've changed the pcb, [3rd time] but this time no luck ? the boiler calls for heat but the boiler wont fire up and the green light flashes and then goes back to red, fan ? valve ? can i change these myself ? HELP !

paul

February 2011

Need to mend your Potterton plumbing?

why did you change the pcb three times ? were they faulty ? how long did they last ? brian February 2011

Add An Answer Form

Add your answer using the form below ...

Other questions in this category - D.I.Y, Plumbing

We are not getting hot water Whymight that be?

At the moment the boiler does not heat the water. The Green light is on.When the dial is on Radiator/Water the light remains on if we put it to Water only the light goes off. It is a Potterton 24...

Click here for the repair.
no fault code ?

intermiting fault on central heating side of my potterton boiler but no fault code but it will start up on its own...

Click here for how to mend it.
changing a FP 2000 Programmer?

Can I swap a Potterton FP 2000 Programmer straight over with an EP3002 onto the same backplate without altering the wiring?...

Click here for how to mend it.
dhw working fine but chw switsh off after 10 second..?

i have combi boiler potterton performa28. i have put new dhw pressure differtial valve..dhw is working fine but chw not. thank you....

Click here for the repair.
Potter powermax HE won't refill?

Hi, Our Potterton powermax HE is showing A15, ie lower pressure. When we tried to used the valves to increase the pressure the boiler won't fill up. There is no water going through, we have checked for leaks etc but cant find any and have no clue how to solve this. We have no hot water or heating. ...

Click here for the repair.
Radiators?

New Potterton Promax SL 15 1yr old supply and fit by British Gas, its recently had replacement heat exchanger fitted by Baxi under extra 3months warranty. As water initialy circulates through rads on fire up the water in some rads 'Gurgle' does this mean 'sludge'? no air only water when rad air...

Click here for the fix.
How to get hot water?

I have a Potterton oil fired combi boiler its ok on the heating but absolute rubbish on the hot water supply. Can it be stripped of the combi parts and used as a conventional boiler and add a invented stainless steel cylinder as its about 7 years old...

Click here for the fix.
No heating or hot water?

I drained my system down (potterton Flamingo 50) . I am trying to refill but no water is going through the system , have water to the inlet on the boiler but it wont go any further. Any ideas , thanks....

Click here for the repair.

			Ask for free help
:: home :: add a question :: search		:: help :: most recent :: unanswered
	Search: Go