Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
Hi. todaye while i was playing, i noticed that there is a cylindrical wood in my violin! moving, i am sure it is not entered from outside to my violin,so is there sth that is broken in it?
johnypersian September 2010
It might not be a bridge support my guess is it's the sound post.
See the question ' how to put a sound post in to a violin'
fourth question below yours it's likely a specialist job to re-fit as it will be moved around for the best sound.
Bob September 2010
I think it is a piece that is wedged in underneath the bridge to support it,it is not glued,you will need special pliers to refit it.
Can I mend my violin?The Black bit with the silver bracket you put your chin on has come off of the violin. Also a thin bit of cork has come loose with it? Not sure if I can mend it or it needs to be done professionally, can you kindly please advise....Click here for the repair.
rebushing of holes in peg-box to install new pegs.?peg holes in peg box have been reamed and are now to large for standard size pegs. can the holes be rebushed and drilled/reamed for new pegs ? if so. are bushings available commercially ?...Click here for the fix.
what should I use to attach the tailpiece to the button?Help please! The little "cable" that attaches the tail piece to the button on my violin has broken. I took it to a local repairman and he replaced it with some sort of strong 'string' but it snapped again as soon as I tried to tune the violin. What is the proper material for this "string" and wha...Click here for the fix.
how to put a sound post into a violin?The sound post seems to be missing from my violin ? how can i put a new one in place. is there a special tool for this job? I am a very skilled woodworker so i am not affraid to have a go at it...Click here for the fix.
How do I replace the button at the end of the violin?The Button has been broken off the end of the violin, how do I remove the old section and replace the new? what glue do I use?...Click here for the fix.
My Violin is out of tune every Thursday when I go to my lessons.?My pegs are really loose and I want to know if I can do anything....Click here for how to mend it.
violin reglue?I glued the neck back on an older violin(3/4 lewis) and the clamps slipped and the neck is off center and too high--how can I loosen the glue and safely redo the joint? I used "TITEBOND"HIDE GLUE-I don't have a heating iron or any equipment....Click here for how to mend it.
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.