how do I replace the hard plastic coupling that spins the blender blades?
I own a KitchenAid blender model KSB5AC3. I've destroyed the black hard plastic coupler with the vanes that the base of the blender jar sits on. I've got a new plastic coupler but I don't know how to remove the old one and replace the new one.
Can you help.
I have exactly the same problem and was wondering if you got any answers or figured it out. I was also wondering where you got another plastic coupling.
Karen March 2007
My "coupler" broke apart this morning. I was able to remove it by grinding down the 9/32" open end side on my craftsman combination ignition wrenches to just slightly thinner than the handle. The wrench now fits the shaft under the coupler. I made sure it was completely seated on the shaft by tapping it in. The coupler is left hand threaded so it comes off by turning it backwards. I had to use a slip jaw "water pump" pliers to turn it. It came right off. The good news is I didn't have to disassemble the blender at all. Keep the wrench handy to snug the new one on but do not use the pliers on the new coupler. Judging from the way my coupler came apart, they are easily damaged. It is just a plastic piece molded over a metal hub and it turns at high rpm so use caution tightening it securely without marring it or damaging it. I hope that helps.
My kitchenaid professional series stand mixer won't turn on...?My professional series kitchenaid stand mixer won't turn on. The power is fine. The last time I used it, it got hot to the touch and had a bad smell. I turned it off immediately. And now, nothing! Help!...Click here for the fix.
Replace a Cord on a Kitchenaid 4c mixer?I cant see where there is a screw or device that lets me take me take off the the back cover to get to the cord.
Would someone take pity and explain clearly what to do
Thanks, Judy...Click here for the fix.
kitchen aid 550 professional burned up motor?I received as gift a Kitchenaid Mixer from canada. it works 110 volt and unfortunately has been used on 220!!! Itis possible to repalce the motor or fix it....Click here for the fix.
how to replace the power cord on a kitchenaid K5-A ?I can take it apart, but the cord goes in through the bottom middle, into a space I cannot see. The wires in the back don't seem to be attached to the power cord. Any ideas?...Click here for the fix.
Kitchen Aid - speed lever?Steve's response means that my KitchenAid is working again - but how do you replace the speed lever? The black covering of mine has come off and I have the replacement but can't easily work out which screws to undo to get to the lever....Click here for the fix.
kitchenaid mixer model k5m90wh?kitchenaid mixer model k5m90wh is having some old leaking around the head of the mixer. Removed a couple screws under the head and some oil is there too. Do I need to take the unit apart and re-grease the bearings.?...Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.