How to mend ... Drum Will Not Come

hotpoint hvl211washing machine flashing lights?

The lights all flash at turn on, then inlet water starts and stops and now the wash cycle hardly turns the dru... [Read more]

how to I check fault Beko wm71275?

beko wm 71275. won't spin.will drain some/most water but drum won't spin now.would this be the brushes on the... [Read more]

can i repair the problem below myself?

When in spin mode.Drum stationary,motor running,something loose banging around inside back of drum.I found wha... [Read more]

Hotpoint WMA40 not draining?

The drum does not drain after wash, so rinse water goes in on top until it fills right up and overflows! There... [Read more]

tumble dryer?

miele proffesional pt7136 tumble dryer when put on cottons setting comes up with error code - adjust the load ... [Read more]

a lot of noise and "burning rubber" smell?

I have a 5 year old Miele Novotronic Premier 520 washing machine that over the past 3 months started to make a... [Read more]

Replacing drum Bearings On Servis ModelM3110W?

How much is involved in Doing this

how can i fix my zanussi elecrolux mod zwf1427w?

when my washings spinning there is a loud noise like the drum is banging on the glass front am afraid its goin... [Read more]

zanussi electrolux mod zwf1427w?

my wasing machine makes a noise when spinning like its knocking on the glass can the drum be fixed am afraid t... [Read more]

zanussi electrolux?

my washing machine is making a bad noise when spinning like the drum is knocking on the glass can I tighten th... [Read more]

drum seems unseated , is it a bearing or belt issue?

how to i dismantle the machine to find out ?

how to repair?

I fitted a new element to a hotpoint condenser dryer model CTD00P .The element is working but no heat in the d... [Read more]

Indesit IS70C Failing to heat up?

I have an Indesit IS70C condenser drying which does not heat up anymore. The drum turns but it appears that t... [Read more]

change rubber between drum and door meile novatronic premier?

how do i change it

I want to change the drum bearings?

I have the outer casing and drum out but cannot split the outer casing.There are no screws.

Very load noise when drum moving. Emptied and clunk noise when turning drum?

What could be wrong. Is this a bearing problem?

Hotpoint TDC60 Intermittent Drum Rotation?

Hi, My Hotpoint TDC60 tumble dryer heats fine but rotates briefly before it makes a short crackling noise (li... [Read more]

my tumble dryer cut off once I star it?

My tumble dryer model T35850 cuts off once I start it. The light of the drum goes on and off after I choose th... [Read more]

Drum on zanussi aqua cycle stopped turning?

Found hard plastic shirt collar stays stuck in drum removed them some had already been shredded and found in f... [Read more]

Hotpoint ts12 has just stopped working?

drum has just stopped working. Thought fuse had gone has the mains light had gone out, but when i open the doo... [Read more]