How to mend ... Jcb

How can I fix my 1986 JCB 3CX 4WD sitemaster- gearbox problem?

Gearbox loosing transmission fluid from drain hole at bottom of bell housing (pouring out). I am assuming a se... [Read more]

jcb 525-58 hydraulic hose repair?

PLEASE TELL ME HOW CAN I REPLACE SAFELY THE HYDRAULIC HOSE INSIDE THE MOVING PARTS OF THE TELESCOPIC

Manually cranking over a JCB 3c?

When home I tried towing it whilst in 1st gear, just to see what sort of noise came from the engine and thus p... [Read more]

slow hydraulics?

ive just bought a jcb 812 the problem is it is very slow in slewing and when you start tracking and working b... [Read more]

5.what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

Thankyou for your time,knowlege and help,Mr.Toad. Very much appreciated. Yes, i agree,its looking gearboxish, ... [Read more]

4. what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

Thanks, MrToad. The shiny plunger is returning fully into the bushing[threaded with nut],with no shiny left ex... [Read more]

3. what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

Thankyou for your help,Mr.Toad. When clutch pedal is released the 'rod' returns back into the threaded 'shaft... [Read more]

JCB hydraulics ?

Thank you again Mr Toad It occurs to me (not yet having taught myself the workings of a JCB) that perhaps the... [Read more]

what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

No forward/reverse drive.Tor/conv fluid at correct level now,however it was much too high previously, Mr Toad.... [Read more]

what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

I`m not getting any forward/reverse drive when operating forward/reverse lever in all gears[4].This problem oc... [Read more]

Moving the JCB?

Thank you Guys both for your suggestions. Nelson, good input but sadly I don't have a suitable dump truck! M... [Read more]

Moving a JCB that does not run?

I recently brought an old JCB 3C Mk 111 from a local farmer. It had been stood for a few months since “the e... [Read more]

Locating hydraulic problem on jcb 3cx 86 approx?

Front bucket creeps down on the crowd, there are no oil leaks, any imput would be much appreciated

JCB 3c2?

Does a jcb 3c2 have a glow plug and if so where is it?

How do you re wire a 1972 JCB Mark II?

How do you re wire a 1972 JCB Mark II. At the moment there is no wires on the machine at all. I am re storin... [Read more]

how to fix fwd/rev onJCB 214?

the shuttle shift on my JCB 214 backhoe works some of the time,what puts the machine into gear and how would I... [Read more]

JCB 3cx Contractor Transmission?

I need to find the oil pressure switch on the JCB 3cx Contractor. Transmission number 442-00330/4/247.

wiring diagram JCB 801 mark 1?

does anyone know where I can obtain the above wiring diagram ? any help would be appreciated. regards Woody

JCB 3CX?

I am trying to get the rev clock working on my 3cx Is it wired from the altenator?

LCB 3c Mk11 Cab?

Does anybody have a cab or know where to get one for a JCB 3C Mk11