The boiler was working. I turned on the hot water tap and no hot water. Looked at the boiler, You can hear a clicking noise but not starting. Had a look inside and the only thing i can see that may not be right is on the left board. Label Sg1 ...as a spark in the middle of it every it, it goes to start.
Hi andrew there is a little red button when you take the face of the boiler off. press that -this is the reset button for overheating if it works but the problem persist could be the fan not cooling the boiler down making it over heat. In that case time to get a pro out .
joe
December 2007
Hi, We have now moved on, Now the system starts runs for 5-10 min and then shuts down. Then sg1 starts to flash. Is this a fail safe device?
howtomendit.com for free repair help, information and advice.
