Recent: Home max fs506x?

Mend > Hair Straighteners

Mend ghd wide plate Changed Fuse Thought

help with my ghd wide plate?

hi there
i have changed the fuse of my ghd with 13 amp yesterday as i thought it could be fuse that has stopped working, still no luck. only thing is original was 3 amp and i tried with 13 amp. do you think that could be the reason it did not work. please helpppppppppppppp

karen
November 2007
That's not the reason, but before you plug in again take the 13 amp out and replace the 3 amp one.
A common problem with these is where the mains cable enters the body of the straightners. I usually remove the swivel mechanism and solder direct to the pads. No more problems.

Colin
November 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Changed Fuse Thought

Related Questions ...

Mend vacuum cleaner miele motor
2

What could be wrong with my Miele Vacuum cleaner?

I have a Miele S290. After changing bags and filters it made a whining noise and then came to a stop. Could no... [Read more]
Mend power gone not fuse
1

Power gone, not fuse, plugs in and no power light?

Has run perfectly for over 20 years. plugged it in and "something" caused a flash. Thought it might be a fus... [Read more]
Mend ecotec fault code hot water
1

Vailllant ecotec plus 937 - fault code?

I had a power cut and switched off my boiler (ecotecplus 937). When power was restored I put it back on and th... [Read more]
Mend bulb side front
1

thanks for the answer?

i had a number plate bulb out so i changed it with the lights on it came on then went out taking the other num... [Read more]
Mend zanussi working dryer
2

Zanussi zwd1471w not working, 'on' light comes on but nothing else?

Yesterday our washer dryer stopped and turned off towards the end of a wash cycle - turned out the fuse in the... [Read more]
Mend cold start morning
3

2004 alhambra tdi (auy engine) cold start fault?

in the morning car will fire for a spilt second then cuts out then i turn it over for about 10 to 15 seconds a... [Read more]
Mend fuse correct safe
3

Which fuse is correct? and safe?

My B and D D808 electric lawn mower -it's very old-cut out today as it has done many times before. Usually I c... [Read more]
Mend wrong vacuum noise
3

What could be wrong with my Miele Vacuum cleaner?

I have a Miele S290. After changing bags and filters it made a whining noise and then came to a stop. Could no... [Read more]
Mend ford galaxy petrol
1

1999 ford galaxy reversing lights and rear back windows?

hi i own a ford galaxy 2.3 petrol and the reversing lights havent worked since i have owned the car i thought ... [Read more]
Mend freezer problem sound
2

indesit fridge freezer problem?

my indesit total no frost fridge freezer has developed a strange problem, there is a clicking sound coming fro... [Read more]
Mend overheating fuse tumble dryer
2

What's wrong with my White Knight Tumble Dryer?

I have a White Knight Tumble, model No 447WV. Machine will start and run ok but then after about 10 mins cuts... [Read more]
Mend washing machine repair motor
2

How can I fix my Hotpoint Aquarious Extra WMA36?

Machine worked well for a good few years, until it stopped a few months ago, I did bit of poking inside and fo... [Read more]
Mend overheating filters switch
1

Orange multifunction vax cleaner?

My vax cleaner keeps cutting out. At first i thought it was the fuse, so changed fuse still wont operate. Then... [Read more]
Mend washer working minutes
3

Halfords HP150 Pressure washer stopped working?

My Halfords HP150 Pressure Washer stopped working yesterday after approx 15 minutes of use (Not continuous). I... [Read more]
Mend control panel tamper battery
1

Veritas r8+ (lid tamper)?

Hi, was looking on the forums at posts by fools such as myself with regards to the engineer codes for the veri... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Hair Straighteners ...