How can if fix my diplomat dishwasher adp8234?

e9 is an error code hold down the last button on the right for 30 seconds to reset the error

steve
November 2007

Hi,
I had same for several weeks so I made sure waste pipe was not too high at rear to ensure free flow. Then I took out the bottom spray arm and trays and found water in bottom so used cloth/sponge to remove and then carefully used a stiff wire/coat hanger to clean out rubbish from waste hole. Then I put in a dishwasher cleaner soloution in and reduced the water pressure slightly at the house mains stop cock as it was quite powerfull. Turned on and all ok now. www.sasshop.co.uk

www.sasshop.co.uk
March 2006