Setting the time on BT Freelance XD1500 Answering Machine?

Hold down stop button...use >>to set day then press stop repeat for time

mo
April 2011

wow that was hard. but thanks ibozz

mooky99
September 2010

Thanks Ibozz

I followed your intructions and they were spot on
Thanks again

Andy

andyearnie
January 2010

how do you set the answr machine on the BT Freelance XD1500. When someone calls, it says the message but the beep doesnt come on for them to leave a meassage. can anyone help???

kirsty
October 2008

"If at any stage you want to alter any segeny of the announced setting ..."

Apologies for the confusing typo, that should have read ...

"If at any stage you want to alter any segment of the announced setting ..."

iBozz
November 2007

Press the Message Stop key (which may have the word Stop on it or an oblong black rectangle depending on the version you have), just to the right of the Play key, and hold it down for a couple of seconds and then release it. It will announce the currently set day.

If the Day is correct, press the Stop Key again and release it. It will announce the currently set Day and Hour.

If they are correct, press the Key again and release it. It will announce the currently set Day, Hour and Minute.

If they are all correct, leave it and it will confirm the setting.

If at any stage you want to alter any segeny of the announced setting, use the Message Forward key or Message Backward key, probably located to the right of the unit, just after it has announced the "incorrect" setting. At each depression, they will announce the new setting. When it is correct, press the Stop key again and release it to move to the next part.

You do not use the Plus and Minus volume keys, which at first sight would appear to be the logial ones to use.

Hope that helps.

iBozz
November 2007

try http://www.telephonesonline.co.uk/_telephone_user_guides/_bt_phones/bt_studio_1500.pdf

Kate
November 2007