Hi,
Hope someone may help me with a probelm that i have
Just bought a new electric shower beinf a triton t60i
when i removed my old shower it had the L N &E for the power coming in and also two connections being L & N for a pump, now the proble is that i installed everything upto the pump L&N as i am unsure were these go......
Can anyone help me or point me in the right direction please
cliff davies, where are you from please? are you in the midlands area?
?
September 2008
i agree there is no need for a pump on a t60 mains water pressure only, did you have a shower unit with an integral pump inside it if so this would have been supplied by hot and cold water NOT MAINS PRESSURE. WHICH YOU NOW NEED. also what size supply cable is installed you now require min of 6mm and poss 10mm depending on kw of new shower.
cliff davies
October 2007
waster
.
October 2007
what pump ?
the t60i is a electric shower it's doesn't need or have a pump,
it use mains water pressure.
what shower did you remove ?
hi-spec plumbing & heating
October 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
