How can I put new springs in my NEFF fitted oven door?

Hi Richard

Give me your ENR No (located on the makers plate plus the FD
No. (Fabrication Date Code) Then I can ID the correct set for you

We will send you a pair of new hindges which contain the springs.

The old set can be removed by unscrewing the screws at the base of the door and inside which hold them in place

They are then replaced with the new ones. Its not rocket science and can be done with door removed and laid on on a flat surface.

Regards Bernhard
aceservicesnn5@aol.com

Bernhard
April 2005