I have an old Atco lawnmower and cannot get it to start.
Unfortunately do not have model no except number on engine 280152.
No Spark so have cleaned around windings and spark points.
Winding resistance 22k ohm.
Any advice on what may be the problem greatly appreciated.
you need to clean the mag points with file or dry oil stone.
they are under the flywheel.
look through the oval twin holes in the cast.
rotate it till you can see a round cover.
you might have to remove flywheel.if the cover is still in place.???
if you have to remove the flywheel.
mark with punch or scratch, to line up for timing.
when you reasemble.
points just open on last upstroke of piston,last 3/16 of an inch.
also try the atco web site.
paul
November 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lawn mowers.