Recent: Will I need to replace my garden tap?

Mend > Home Heating Systems

Mend Potterton Suprima 30L Boiler Ignition

My potterton suprima 30L boiler will not egnite?

The boiler comes on and the fans working, But it will not ignite a flame the red light is on constant and the green light is flashing

tracy
September 2007
Got a suprima 50 and just had the same issue for the lasr few weeks.... doing some research I found that their is a common issue with the controller PCB's..

.. so I shut off the gas and turned of the electircity and removed mine from the boiler yesterday and resoldered the main board connectors.. replaced and now it is all working 100% again..

New boards are £150-250 but you can get refurbs for around £50.. not sure how much labour it is to replace but I am guessing 1-2 hours at £40-£50/hour

MJHamilton
September 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Boiler Ignition Potterton

Related Questions ...

Mend ignition boiler working
1

potterton netaheat profile no ignition?

our old potterton boiler has not been used for around two years and was working well then but today there is n... [Read more]
Mend problem time pc
1

How can I fix my potterton max 15sl ignition problem?

My boiler is not firing up I have to reset it each time. Could it be the PC board.
Mend boiler ignition control board
2

Potterton 60e not igniting?

Have the above boiler that's making all the right noises but fails to ignite. You can hear a faint ticking fr... [Read more]
Mend boiler heating ignition
3

Potterton profile 40e ignition problem?

Hi can anyone help, I have a potterton profile 40e the boiler has been running fine until the other morning. I... [Read more]
Mend boiler ignition heating
1

Potterton kingfisher 2ignition problem?

OK. We have a Potterton Kingfisher II boiler. There is an ignition push switch and a black dial (settings: off... [Read more]
Mend boiler ignition gas
2

Potterton profile 80el : not igniting?

Hi after the summer "hot weather" , tried to restart the boiler but.. no ignition and no fire pump work... [Read more]
Mend boiler PCB Potterton
1

Potterton Profile 80E Starts OK on HW but not on CH?

Boiler would start (fan running for 20 seconds) but would not complete the ignition cycle. Replaced the PCB. A... [Read more]
Mend boiler ignition burner
3

Re: potterton profile 80e noisy ignition?

In the care home where i work as electrician we have a boiler as above and for a long time it gives a loud rep... [Read more]
Mend boiler failure heating
1

Potterton performa 30he Iginition failure?

what causes Performa 30HE ignition to go wrong. Boiler engineer just replaced one last week together with PCB... [Read more]
Mend boiler heating electrode
1

boiler needs up to 10 tries before firing properly. Why?

potterton profile 80e problem ---- boiler has between 6 and 10 tries at igniting before it bursts into li... [Read more]
Mend boiler burner ignition
1

Potterton Housewarmer 55. How can I fix it?

Roaring noise and random ignition? My boiler like many makes the roaring noise on igntion. I have replaced th... [Read more]
Mend boiler heating failure
1

Potterton 24 boiler?

My boiler was chugging away merrily providing heat and hot water. Whilst outside trying to read the gas meter ... [Read more]
Mend central heating radiators thermostat
2

Central heating confusion?

I seem to only get hot radiators while my boiler heats my hot water but as soon as that get to temprature even... [Read more]
Mend boiler heating potterton
1

Potterton boiler wont ignite?

I bled the bathroom radiator earlier and now the boiler wont ignite. Ive pressed the reset button but there is... [Read more]
Mend boiler heating ignition
1

what if its not sparking?

i have tried to ignite the boiler but there is no sparke;can anybody help.there is no ignition button that i c... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...