two elements on my hotpoint ew91s ceramic hob have stopped regulating themselves and just go to full heat even on the lowest settings. what do i need to do to fix the problem?
sorry i was wandering if you have the manual for your cooker because i need a copy . Can you help?
joan
February 2009
All ceramic hobs are controlled by effect regulators. When the ring is full on all the time the regulator is defect and needs changing. The regulators have a number on them which is what you need to order new ones off the net. The last two numbers tell if they run on 240 or 415V. To change, turn off the power then remove leads one by one putting them on to the new reg so they dont get mixed up.. Easy peasy..
Steve.
Steve Hand
August 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix electric cookers.