The brackets for my radiator failed which meant I had to remove the radiator, and in the process drain the radiator.
I am in the process of trying to re-connect the radiator back onto the wall.
Do I need to fill up the pressurised combi with more water or just put the radiator back on wall and switch on the comi??? Theres a red metal container behind the comi...
if i've to put water in, how do I know who much water to put in ?
After refitting rad and opening rad valves,rad will need to be vented through vent screw at the end up top or the rear.system pressure will drop.open filling loop,located under boiler or in hot press,recognisable by flexible hose,refill system to 1 or 1.5 bar.
Impressive heating
July 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
