In trying to fish out the fuel filter from inside the tank, I pulled on the wrong hose. It's evidently the fuel line to the carb, since it squirts when I push the priming bulb. Using my finger and a wire I can't seem to feel or detect any nipple in the tank to put the hose back on to. Any idea where in the tank it is? I might be able to put the hose back on with a pair of foreceps if I knew where. Do I have to disassemble the saw?
Help?
there are two fule hose that go into the fuel tank. The one with the filter goes to the carburator. The second hose doesn't have a filter and goes to the primer bulb. To get to them you'll need to take off the side with the primer bulb. Hope it helps, just finished replacing all my worn out and decaying hoses with the help of my brother all due to a cracked chain oil reservoir that we replaced.
TPM
July 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix chainsaws.