I have a Creda Simplicity 1200 which will not spin?

That seemed to work for me.. (for now that is :o) )

Jay
August 2007

most probably pump

dave
May 2007

Check the waste/outlet hose is unobstructed first, If all seems ok here, lower the end of the hose into a bowl, if water does not come out it indicates a blockage somewhere, filter is underneath the drum at the rear, remove the lower back panel to access. If this is all clear there may be something jamming the pump, this is also easily accessible from the rear panel. Make sure m/c is disconnected from mains supply before investigating, also watch your hands on sharp edges and the spring clips that retain the sump hose.

Regards,
Mark.

Markone
May 2007