im changing the clutch on a r reg boxer took both drive shafts out and all bell housing bolts gearbox comes away about 20mm and then gets stuck is ther anything on release bearing holding it in
I can not remove the gearbox from the peogeot boxer
it only moves about 20mm from the engine and get stuck.What can I do to remove the gearbox
Eugene Dekker
July 2011
You need to remove the clutch fork shaft first. Use a 12mm 1/4" drive long socket to press into the plastic cage in the back of the gearbox - this is to press in 3 tabs to allow the fork pivot rod to be drawn out. Next screw in a very long threaded bolt through the socket and into the thread in the fork pivot bar. Use 2 lever bars together between the bolt head and socket to keep the tension on the tabs, but also to drive the bolt (and rod) out of the gearbox. The clutch fork wont come out of the casing until the gearbox is moved away from the engine a bit.
mobile mechanic
September 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.