Recent: LG FC930W Safe Mode: Unlock Front Buttons Without Remote

Mend > Lawn Mowers

Mend Snapper SR1333 Mower Gear

Snapper, SR1333 Lawn Mower?

After lawn mower starts, and put in gear it shuts down.Is this a safety feature, or could there be another problem?

Benton
May 2007
check the switch behind the gear selector mine has a black push button that is engaged when in neutral

also there are 3 wires that are grounded to the motor on the oppisite side of the muffler by the throttle assy
take those loose and make sure they dont touch anything then try it fyi this is also the ground for the run switch so to stop the mower youl have to choke it out

Gary
August 2010
what year is the SR1333

john rogers
June 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Mower Snapper Gear

Related Questions ...

Mend riding mower safety switch dies
2

snapper riding mower won't stay running in gear, seat safety disconnected?

My snapper SR1433 has already had the safety switch under the seat disconnected and now won't stay running whe... [Read more]
Mend mower forward reverse
1

mower won't go forward or reverse?

I have a snapper model 30083. When placed in gear, forward or reverse, it just slightly moves then stops
Mend engine mower model good
1

Snapper rear engine mower will not move when put in gear?

I have a Snapper 28" rear engine mower model# 281318BE and it will not move when I put it in gear. Ran good th... [Read more]
Mend snapper drive model mower
1

How can I adjust my Snapper drive gear plate, model 30086S?

I have a Snapper model 30086S and I need to know how to adjust the drive gear plate. I have purchased a new d... [Read more]
Mend snapper rear mower
2

old snapper rear engine mower, barely moves?

I have an old snapper rear engine mower. When I am mowing it randomly slows and stops. The engine still runs... [Read more]
Mend rear snapper riding
1

proper sequence to replacing axle in a rear drive snapper riding mower?

I took the axle and gears out of a 27 inch rear engine, rear wheel drive snapper to try to repair the drive. F... [Read more]
Mend wont into gear
1

why wont my snapper riding mower go into gear?

whay wont it go into gear ?
Mend How to mend it?
2

my snapper lt16 lurches forward in all the gears except 1st?

It slowley goes into the gear I select but lurches forward then stops and lurches forward again. How do I fix ... [Read more]
Mend starts fine stalls
2

Snapper 85-87(?) 6 series Model 25066 starts fine, stalls in gear?

Single blade mower, 25 or 26" cut. Tecumsah engine. Manual start (no battery) Start up fine & mowed fine fo... [Read more]
Mend snapper lawn model
1

my old snapper lawn mower slows in 5th and 4th gear.what to do?

snapper rear engine lawn mower. model # 2681. 5th and 4th gear slow to a stop. 1st and 2nd are fine, now 3rd i... [Read more]
Mend lawn mower repair briggs & stratton engine
1

Briggs & Straton electric starter?

I have a Snapper riding mower with a 12 hp B & S I/C engine. I was trying to replace the plastic tooth gear on... [Read more]
Mend snapper mower engine
3

Snapper riding mower wont stay running when put in gear?

I have a snapper rear engine mower less than two years old.It will start fine and stay running as long as my f... [Read more]
Mend lawn mower snapper
1

snapper lawn mower runs but will not move into gear?

The mower runs but will not move when put into gear. I would appreciate any ideas. Thanks
Mend mower gear clutch
1

Snapper 41 inch riding mower with disk drive will not run in reverse?

I have found it impossible to ajust the disk drive on the 41 inch Snapper mower so that it will run in reverse... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Lawn Mowers ...