Mitsubishi Diamond Pro 930 white line problem?

In the end I took Pro 930 down to the tip and got me a nice wide screen Samsung

harry duff
September 2008

Please could you say Where is connector s301 on mainboard. Many thanks.

Razorback
July 2008

Mitsubishi Diamond Pro 930 white line problem?
Qutoe***


A white line across a blacked out screen intermitnetly shows up on my Mitsubishi Diamond Pro 930 monitor. I have had the dual screens for more than 14 month now. Dell has already replaced the Grpahics card for me - so it is not the graphics card. I run a graphic design business and right now I am loosing time and money on this - Please help if any one knowes this problem***


I have the same its been doing it for 2 moths, and a good hit on the top of the case will make it come back to its brilliance, i'd like to look inside , but i cant work out how to get the back off, without another pair of hands. anyone know where a workshop manual is? i'v looked with no joy, many thanks harryduff

harryduff
July 2007

Re-solder connector s301 on monitors mainboard - and be happy =)

Masurao
June 2007

I've been having this problem combined with a drastic decrease in refresh rate. Now the refresh rate is less than 70 Hz. Well, I don't have the perfectly correct answer on your question, but slapping the monitor helps.:) Other attempts of maintanence might involve either a crowbar or a specialist in electronics.

Stan
May 2007

I cannot give you a solution but I am on this page because my Diamond Pro 930 has been doing the same thing for some time now and it seems to be becoming more frequent. This monitor is over 4 years old and is still a brilliant piece of kit when it runs properly. I have always found that turning it off and back on several times eventually makes it function normally. However the problem is becoming more frequent.
jacklondon May 13 07

david.awright@btinternet.com
May 2007