The timer knob on my indesit washer-dryer keeps clicking round?

I have the W93. It confused me as to what was going on. We were going to get another 2nd hand mch until l found these cures. They worked. Thanks so much folks!

Daniel
June 2014

sounds like a faulty pcb/ eprom

Ted
June 2013

help i have tried all of this turning it on and off but still it clicks round please someone help i cant afford expensive repairs

driving me mad
November 2012

The programme selector
knob keeps turning? I've tried to turn it to a dot, turned it on, and it was still, but when i turned i to a program again it started turning again. The model i W83. Please help me with this

Ivy
May 2010

the timer knob on my indesit wa 105 uk washer keeps clincking round on it own help

jj
April 2010

i keep trying to re-set it but it isnt working,, starts a wash then stops and starts clicking again,, previously i have managed to re-set it, help!! i cant afford a new one!

ann
September 2008

Got exactly the same problem.and just done as John Fox said and now it works a treat......So a big THANK YOU TO JOHN FOX...

Terry Smith
June 2008

Followed Adams advice on my Indesit wa105 and its working perfectly again !!!

I have no doubt that if I called someone out they would have told me a few porkies and charged me silly money for a simple fix.

Excellent

Will have to let my freinds know about this site.

Jerome
March 2006

anybody know what each of the errors are and how many flashes

john fox
October 2004

I have just had a similar problem with my Indesit W161 washing machine; the program selector just kept 'clicking' around. After following Adam's advice - turn the machine off, turn the program selector to a red dot and then turn it back on again - it seems to be working as normal. I'm glad the solution wasn't expensive ;-)
Thanks Adam.

Stuart
September 2004

It means the memory has got itself confused. Reset the machine by turning the machine off and then turn the program selector to off (one of the 4 black dots), turn it back on and the LED should blink fast for a moment. Turn it off, select the program you want and then turn it back on. The reason mine was confused was one of the connectors to the pump was loose. I got quoted £90 for a timer in a shop but found this out and it's working fine.

Adam
June 2004

When the dial is clicking round the small red light on the facia panel will also be pulsing. Count the number of continuous pulses, this number of pulses lets you know the fault with your machine.

E Lambert.
June 2004

yep me too, went in shop and was told i needed new timer-minimum 70-80 quid he said better off getting new machine. I thanked him for his honesty, as he doesnt even sell machines only parts!!

Matt
June 2004

Got exactly the same problem. Did you resolve it in the end?

ADAM
June 2004