Recent: Safely remove screen protector from a Macbook Air?

Mend > Washing Machines

Mend Hotpoint WF840 Point Machine 1400

I keep getting F-05 no my Hot Point WF840?

I have a washing machine Hot Point Ultima Super Silent 1400 Spin Model Number WF840.
When I put the washing on a 30 min cycle it starts of fine the machine fills up with water and than the washing goes round and than when I have about 11min left the machine comes up with F-05 and it does not carry on going through the cycle.
So I have to unplug it at the mains to let the lock of the machine so that I can take the clothes out and than I have to take the water out with a pan.
When the machine is unpluged from the mains the F-05 goes of than I try and start again which it allowes me to but than when there is only 11min left it does the same again.
Please can you let me know what the problem is and what does F-05 mean.

Adele Peck
April 2007
I have an Hotpoint Ultima WF840. It also had F-05 on it. We took off the back panel and disconnected the hose (plastic clip was a pain but came off after about 10 mins of waggling it). Took out the pump, cleared it and some debris was in pump and filter under drum (including toe end of a pair of tights, a bra wire in pieces, the fastening section off a bra and some curtain hooks, only gutted there was no money ha ha). Turned the blades inside pump which still clicked but put together again and set away. Drained ok this time but still made buzzing and clicking sounds.
So we had to replace the pump (we were lucky, next door's hotpoint had busted electrics and they'd bought new rather than fix so we used their pump as was in perfect working order, but they are cheap enough from an independant retailer and very easy to replace).
Its now all working perfectly, and just as silent as it was on first purchase.
After all the panics about paying for repair or taking apart, it was very eays and all my washing done again.
Hope this helps anyone who needs it!

Suzie
December 2007
f05 pressure sw stuck on full

airkool@hotmail.co.uk
April 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Point Machine 1400

Related Questions ...

Mend hot 1400 spin
3

Hot point WD 440 1400 spin ?

The dryer does not work . I select 50% left hand control . Middle control dry selected and M selected on righ... [Read more]
Mend washing machine fault code pump
1

Hotpoint Aquarius WF240P 1400 Spin - Not working - How can I fix it?

I have a Hotpoint WF2140P washing machine displaying a fault code which is Energy Save LED flashing slow, and ... [Read more]
Mend washing machine fault water supply
1

my zanussi progrsss 1400 wash mc is showing a fill time out fault?

i have checked some info and have checked the water supply - good. kinks in the hose - none cleared filter at ... [Read more]
Mend washing machine Zanussi Jetsystem
1

My washing machine is not filling up with water or completing a full cycle?

Hi Having worked fine in the morning my Zanussi Jetsystem 1400 washing machine starts a cycle as you would ... [Read more]
Mend washing machine Hotpoint slow spin
1

problems with hotpoint wma62, 1400?

select a programme initial water stars to fill machine spins slowly, waiting for second injection of water at ... [Read more]
Mend washing machine no power fuse
1

Zanussi Jetsystem 1400 Dead?

The washing machine has no power, have checked mains fuse and suspect a circuit breaker has tripped or interna... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...