The plastic front panel of one of my eletrical sockets built into the wall will not screw in at all. I have tried different screws but they just slip out. Is there a way of rethreading the socket and do I need special screws? Replacing the socket isn't a viable option.
yes there is a special retreader screwdriver you can buy them from most electrical wholesalers ask for a retreader sr=crewdriver size (M3.5 x 6.0).
Matt
June 2007
you will have to buy a rethreader from the whole salers £5 max
david
June 2007
30mm size 6 screw did the trick - THANKS
Chris
April 2007
Yes...you can buy a 3.5mm threader from any electrical wholesaler...City electrics are good and this should fix the lug which the screws go into.
The threader is like a small screwdriver and costs a few pounds.
If you go into any lctrical wholesaler and explain the problem they will put you right
paul
April 2007
A 3cm long size 4 or size 5 screw will do the job.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix switches and sockets.