Recent: Safely remove screen protector from a Macbook Air?

Mend > Printers

Mend HP IIIP Indicates Error Code

How can I fix a HP IIIP printer that indicates error code 52?

My printer has stopped printing and indicates error code 52, which according to the manual is due to a scanner malfunction and a service is needed. Can I do this myself and how?

Hans
January 2005
Hi Stu,
thanks for your rapid answer. I have dismounted the HP and checked and re-connected all cables. It did not cure. I have found the the spare parts on the web and I agree. They are much too expensive for an old printer!

Hans
January 2005
Hi,
More than likely the scanner assembly needs replacing, otherwise it's the dc controller, bith fairly expensive parts to replace.

If the printer was working fine, remove the covers and check the cable seating from the laser scanner to the dc controller. If the cable is ok, replace the scanner. If that doesn't cure it replace the DC controller. As I said these are both fairly expensive parts so unless you can get second user I'd be more tempted to spend the money on a more up to date printer. It won't cost more to replace it than repair it!

Stu
January 2005

Automatic Answer

We may have found other answers which could help you.

Click here for Indicates Error Code

Related Questions ...

Mend error code indicates
1

Goodman A07 A09 error codes?

Any idea what an A07 and A09 code on Goodman furnace indicates?
Mend worcester 30 cdi boiler
1

Worcester 30 CDi boiler ?

My boiler is blowing the fuse at electrical supply and and error code c6 is showing in boiler. This indicates ... [Read more]
Mend error code 6000
1

How can I fix error code 1328?

I have a Dell Inspiron 6000 laptop with XP that will not boot up. When I switch on all that appears, withi... [Read more]
Mend boiler baxi radiators
1

how can i fix my boiler its a baxi megaflo 28?

i have a baxi megaflo 28 which will heat my hot water and downstairs radiators but when i select heating upsta... [Read more]
Mend wash washing machine cycle
1

AEG lavamat turbo (L 14710-VIT) washer/dryer will not wash?

Hi, I have an AEG lavamat turbo washing machine (L 14710-VIT) that will not wash? It will start the wash cycle... [Read more]
Mend blockage drain pump
2

Washing machine blockage?

I have a Zanussi zwf 1621w and when it is finished its wash we get 2 x beeps and some of the water isn't drain... [Read more]
Mend washing machine fault code repair
1

Hotpoint Ultima WMD960G + Fault F10?

Hotpoint WMD960G stops part through a wash and displays fault/error code "F:10". Power cycling removes the fau... [Read more]
Mend alarm system keypad
3

Premia 9 Alarm box cannot reset?

My Premia 9 alarm system won`t reset, the box LED indicates an error code 11 none of the key pad buttons work ... [Read more]
Mend boiler error thermistor
4

how can i fix my combi?

my glow worm boiler is flashing f10 error code...which indicates something to do with return thermistor sensor... [Read more]
Mend washing machine error code repair
1

Repair pressure switch?

The error code on the front of my Hotpoint WD440G washer/dryer indicates the pressure switch is jammed on. LE... [Read more]
Mend approx years boiler
7

F 13 error on a glow worm 38cxi?

My 38cxi is approx 3 years old and I have had the normal problems with the boiler. F14 which is an over tempe... [Read more]
Mend washing machine error code door lock
1

How can I fix my Zanussi fjs1225?

The symptom of the problem is the machine, with the door closed will not start after pressing the start button... [Read more]
Mend hot water code
2

Vokera Linea24 - failed?

Initially no hot water. Now the entire system has failed. Error code 03 indicates fan has failed. Fan rep... [Read more]
Mend drain pump runs
1

How can I fix my AEG OKO-LAVAMAT 88730 update?

The drain pump for the washing machine runs constantaly even when the appliance is swithhed off but is connect... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Printers ...