Recent: Replacement battery cover?

Mend > Wall Clocks

Mend Hamilton 82/340-020 Runs Long Time

How do you oil Hamilton mantel clock?

I have a Hamilton 82/340-020 mantel clock that runs but will not chime and has not been oiled in a long time. I have a hypodermic needle and wonder if I can oil it with a machine oil with the hypodermic needle? There is a small bar with a sticker on it reading
"Lift" on the inside back of the clock - what do I do with that? Is part of the maintenance program?

Thank you.

Peg Emerson
April 2007
yes, it is alright to oil with machine oil. just put a small drop on each rotating point on back and front side, not the main shaft that the hands are connected to. i think the "lift" arm is just to silence the chimes. hope this helps.

Ron
February 2010
You may want to make sure the lever that says lift is not holding your chime hammers down on the chime rods. This would prevent the hamers from lifting to chime. Most clocks come with this lever for shipping however it can just be lifted up to release the chime hammers. if this is the lever you speak of

jacob a friend to jesus
May 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Runs Long Time

Related Questions ...

Mend combi boiler burner vokera
6

Vokera Maxin 28e combi boiler, DHW runs hot and cold?

A few months ago DHW temperature started to fluctuate mildly between hot and warm. This problem got worse so a... [Read more]
Mend tumble dryer heating drying time
2

runs for 5 mins then stops ?

Proline TDC6A runs and heats ok but after 5minutes turns of and I have to open the door for a few mins then st... [Read more]
Mend digital shower water
1

how do I fix Aqualiser Digital shower?

Switch on, water runs as usual, cold valve opens after short time as usual, then it goes full bore cold and wi... [Read more]
Mend daf engine running
1

DAF 45 engine running temperature?

Hi, what is the normal temperature my horsebox should run at? When stood running the temperature doesnt rise ... [Read more]
Mend dishwasher miele drain pump
1

How can I fix my Miele C975 SC plus dishwasher? ?

My machine seems to carry on working when i close the door although the machine is at the stop position. The m... [Read more]
Mend find currently aspire
1

my laptop lags and crashes?

My laptop lags and crashes and I cant find the cause.? I am currently using an 'Acer aspire 5742G'. Here i... [Read more]
Mend vauxhall heater problem
1

vauxhall vivaro heater problem?

vauxhall vivaro heater takes a long time to heat up, but when it does it runs okay, untill you hit standing tr... [Read more]
Mend combi boiler central heating protherm
1

problem with protherm 80e?

i have a protherm 80e combi boiler. the hot water is fine but the central heating is not working properly. whe... [Read more]
Mend heating boiler airlock
1

Clunking noise when my boiler starts?

When my boiler (Thorn appollo 30/50) starts it makes a kind of clunking noise, sounds like an airlock in the p... [Read more]
Mend cooling fan thermostat engine
1

audi A4 (51/ 2000 ) 2ltr petrol, cooling fan?

cooling fan runs as soon as engine is started, consequently heater takes a long time to warm up. have changed ... [Read more]
Mend pressure time couple
1

erbauer service centres?

Does anyone know where I can get my erbauer pressure washer repaired? It runs for a short time (couple of minu... [Read more]
Mend drum wash empty
1

water retuns to drum after completing wash and leaving empty dry door open ?

a long flexible pipe is connected to trap directly under sink oposite tee suplying dishwasher drain. water run... [Read more]
Mend water problem going
3

No water in hot water tank?

Hi there, I have a problem... lol I'm afraid I'm going to err on the side of giving too much information... [Read more]
Mend ford engine starting
2

I HAVE PROBLEM WITH FORD 2.4 DURATOURQ ENGINE ON STARTING?

ON STARTING ENGINE ,IT RUNS AFTER A FEW SECONDS IT STARTS TO STALL AND MAKING KNOCKING SOUND ...I DONT WANT TO... [Read more]
Mend How to mend it?
2

chainsaw crank bending?

Hi i have a jcb pcs38 chiansaw which was seized from been not used for a long time after the chine snapped it... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Wall Clocks ...

Other models...

Related Categories

Mend Wrist Watches
Wrist Watches