I got a Pirelli GTS23/24 setup and I was wondering what the correct tyre pressure for this motorcycle was...
Pirelli's website told me to check the operating manual of the motorcycle but I bought the bike from someone and unfortunately there was no manual included...
yeah they are quite good i have found some wrong figures though, but they have excellent instructions for doing almost anything to your bike.
Martyn - Gilera DNA 125 Owner
April 2007
Brilliant, thanks! :-)
I think I'm going to buy me one of those too, everybody seems to be using those Haynes manuals... It'll be a good replacement for my missing owner's manual...
Dodgey
April 2007
hi,
According to the haynes gilera dna manual it says that the front should be 29psi(2.0 bar) and the rear should be 32psi(2.2 bar) with rider, and, 36psi(2.5 bar) with passenger.
hope that helps
Martyn
April 2007
ps: my tyre pressure is mesured after warm-up, I don't know how big the difference is between cold and warmed up...
Dodgey
April 2007
I thought the rear wheel was supposed to be inflated more than the front one?
Currently 29psi on front one and 36psi on rear!
Just checked the markings on the tyres:
Front: Max Load 481Lbs at 32psi Cold
Rear: Max Load 619Lbs at 41psi Cold
Dodgey
April 2007
i have a gilera dna 125 have tried numerous tire pressures, best is to have both tire @ 28 psi and more and u get unbalancing from rea and less you get sluggish turning response! had it at 30 psi and was great
but was bit unstable!
fitzy
April 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.