How can Ifix built-in d/w "SMEG" Model,"CSU 2007 B1"-Type "11029"?
When I start a cycle, No. 2 thru 4, the cycle will begin but not finish. The dial stops moving approx. half way thru the cycle and the machine keeps working without advancing to the end of the cycle. The only mode that works is the"Rinse & Hold". I noticed the water temperature remained luke warm thu-out the process. Also my machine is made in Italy if that is of any importance.This dishwasher is 2 1/2 yrs. old.
i am a technicien for this appliance.. so you have to change your thermostat tank ... you can find it in the middle of your heating element. The cost is about 60 $. In the middle of the cycle 4 the timer command the heating element to increase
the water temperature to 65 celsius . after the thermostat cut- off and send the signal to the timer and it can start again.
ps : sorry for my english i'm from Quebec
sebs_s@hotmail.com
October 2007
I can answer this question...
How can Ifix built-in d/w "SMEG" Model,"CSU 2007 B1"-Type "11029"?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.