How can i fix my 2003 ford focus rear washer?

If you look at the washer closley you should see that the injector pulls out of the bodywork where you can get at the pipe supply.These dony come apart very often but maybe frost or fault caused this.If you cant remove injector then remove plastic covers at the top of the tail and get at this from there.

doc
February 2005

i used to work at ford on the service desk this is definately covered under warranty but if you mess with it u may make it worse

si
January 2005

hi Andy
it sound like the plastic pipe has come of somewhere usually at a t piece or onto the washer jet you will need to gain acess to the jet and just push the pipe back onto the jet they are just a push fit.

Rob Francey
January 2005