Kenmore dryer will not start - model #110.86983110?

-I have checked the 220 plug and it is working fine.
-I've checked the door switch w/ an ohm meter and it is working ok.
-I checked the two heater sensors on the venting tube and they appear to be ok.
-I read on the internet that there is a fuse that I should check; however, I can not locate it. The back of the dryer does not come off so the lower front panel is the only access to the interior.

Is there anything else that I should check?

Thank you so very much for your help,
Rand

Rand Ramey
February 2007