A short time ago my sister had given me her old LA-Z-BOY recliner,
The RELAXOR model. It seems that her pet had chewed some of the wiring for the hand held control, and they had given up on trying to fix it. It is still a very nice model and I would really like to get it working again. I may be able to re-wire the control device If it is no longer available. However the power converter to power the system is missing, and I do not know what voltage the system works on. I would greatly appreciate it if you could assist me in getting as much information on this, so I can get the chair to perform once again as it was intended. Thank You!
Need replacement of 5 button hand controller Model 1186OU-07 Serial #169084. Can you help me? Many thanks.
David Dodge
November 2020
Direct plug in Class 2 Transformer Model JK 24751 NA I/P 115VAC 60 Htz 23 W O/P 24VAC 750 mA
The wire is chewed in half and need one like this if there is no replacement PLEASE
Karen McVay
March 2019
The part that moves the leg rest broke. Lazboy model 11860U-07, serial 109327. Where can I get parts?
V Kahl
December 2017
LZM75H - need new controller. Any help?
Kevin D.
February 2017
Hello, I just need a power cord for my LA-Z-BOY model number LZ02H Ser. No. T004130. Can you help?
I, too, have a Lazy Boy recliner, bought in 2001, with a Relaxor heat/massage unit. The heat still works, but the massage part doesn't. Does anyone know if parts are still available for this unit? Husband seems to think it might be the control.
Sharon
October 2012
The plug is missing
dave farren
January 2012
i called 1-734-242-1444 la-z-boy incorporated in monroe michigan and they said they have parts for this type of chair mine is style 01M-523 (found on bottom of chair) then they gave me a deal near that could order the parts
Ashlyn
October 2010
01282 869888 these guys sell la-z-boy gen parts had the same problem with the fridge lead and they sold me one for £40 inc next day del which i didnt think was to bad they also stock hand set parts and everything else.
john
December 2009
It's 12v AC 1.5 amp. Im using a 12v ac 2.5 amp regulated adaptor purchased from maplins. had to cut the plug off and solder my own on. most have only one out put lead so you cant power the fridge and massager. i soldered spurs to the out put lead so i can have fridge and massager wired but cant use them both at the same time. the la z boy adapter must have 2 output leads, one for fridge and the other for the heated massager.
chopper
November 2009
I got an email back from La-Z-Boy claiming they didn't manufacture the Relaxor recliner, therefore they couldn't help me. Do I have that right? Why does the remote say La-Z-Boy on it?
Laura
March 2009
A 12v adapter did it for me.
Sam
November 2008
I also need that part that plug into the wall.
Sam
November 2008
you could always cut off the female end of the the plug and cut off the male end of the power supply, and either solder or twist together and cover with electrical tape. (Make sure you have the poles correct when pairing up the wires)
Andy
July 2008
I am also in need of the transformer for a Lazy Boy. Model # on the relaxor[control name] is LZM02H. If anyone knows of help, please e-mail me- Jerry S. e-mail is scheernj@mtcnet.net
Jerry P Scheerhoorn
June 2008
can u buy a new spring for a lazy boy recliner?
shirley Hopkins
October 2007
the voltage is 12 volts, 25 watt transformer made by laz y boy, the problem is finding a replacement as the plug for the adapter is different from a normal one, good luck.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix chairs.