BEKO XTG611W Glass Lid Hinge Housing replace?

Just a thought: before you start taking things apart, check you can actually get the spares you are likely to need.Theres RansXXXoms and esparesi can think of. You might also try Beko directly.

Ghh
February 2024

Glad to have helped.

I've told the people running this site several times about the issues posting links to that particular supplier. My posts have all been deleted and ignored, with no apology, no explanation and nothing done by Amos Media to actually help people. SMH.
I STILL can't post a link to that site without obfusticating it. SMH²

Ghh
February 2024

Yes, thank you Ghh. It is a very good site but on this occasion no drawing showed any detail of how housing is fitted. I suspect you are right and that there is a securing nut underneath, just means there is a bit more work to do accessing it! Not used this site before and wasn't sure how to thank anybody so I hope this works! (Previously I put the wrong model number for the cooker so repeated my query). Regards, Steve

Steve
February 2024

Update:

In case you missed my post to your earlier question, there's a slew of useful exploded diagrams available here, which might help. You need to copy and paste the link below into your browser BUT remove the XXX between "ranso" and "mspares"

https://www.ransoXXXmspares.co.uk/parts/brands/beko/cookers-hobs/xtg611s%20(7734986382)/?__cf_chl_tk=Sxz07dLilnervfH7iBU6Movx01.TcgtSUhOOTsiQryY-1708864866-0.0-4135

Ghh
February 2024

I think you are the guy to whom I gave the link for RansXXXoms (take out the XXX). There should be some exploded diagrams there. I would hazard a guess that you'll be looking at securing nuts underneath

Ghh
February 2024