I have a Worcestor Bosch 24i which constantly loses system pressure. There are no leaks & the PRV isn't passing, I suspect that the expansion vessel is at fault. I know that the boiler needs to be removed from the wall to replace this, but can the expansion vessel be checked & topped up if needed in situ?
Many thanks
this model it can be removed with it on wall but you have to remove pump, heatexchangers, cut the band holding it in. you can check the vessel for pressure located on the vessel is a valve same as a car if you have car pressure gauge check it. it should be about 1 bar and also see if water is released from valve if so its faulty.you can use a foot pump to get it back up to 1 bar but the system must be empty of water
hi-spec plumbing
December 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.