my dimplex exbury Fire suddenly will not switch on?
Fire will not switch on with remote or manual switch only heating element appears to be working ( no lights, no fan) Is this something I can repairable?
Any DIY shop sells them or EBay but they must not exceed 105mm or they will not fit,they must also be clear glass, warm white and 6 or 7 watts and 360 degree light output ie very similar looking to ordinary candle lamps
toptrish
September 2016
Many thanks, toptrish, have ordered pcb, will be interesting to see if bulb has blown when I dismantle fire so will be replacing with leds as advised. Are these readily available or specialist supplier?
Alan P
September 2016
The pcb requires replacing part No FP 06008.A lamp blowing will damage the pcb,better to replace lamps with 7watt LED candle lamps but make sure they are not longer than 105mm,the size is printed on the package
toptrish
September 2016
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix convector heaters.