Mend > Washing Machines

How can I fix my leaking Maytag A612?

My Maytage A612 Automatic Washer is about 18yrs old. It has developed a leak on the bottom front right side as you look at the machine. It starts to leak immediately upon filling and will continue to leak until the tub empties.

Initially, upon filling it will leak clear water, and then it begins to leak soapy water as the wash cycle begins. I should mention that it will leak even when the desired water level has been reached while filling and the water shuts off automatically.

I have checked the hot and cold water hoses, both hoses are no burst and the hoses and the conections are intact and not showing any leakage at the inlet, the machines connections on the back or the hoses themselves.

What are your suggestions for repair?

Barry Apfelroth
December 2006

Maytag Household Appliances, Washing Machines Leaking Washer Leak Bottom

Take off the front panel. An earlier answer on this forum said to locate the two Phillips screws at the corners of the bottom lip on the front panel. Remove and work off the front panel. My problem was the hose for bleach addition had come loose at the top. But if the water leak is on the right side it's probably a hose to the pump at the bottom right.
Good luck.

Bob
December 2006