Makita BMR104 jobsite radio no writing on LED screen?

I have the same problem. When I press the tune button the display turns blue and no words are visible. I can tune the radio but I can't see the frequency unless I release the tune button.

David
March 2023

If you are wearing polaroid sunglasses take them off, they make the screen go blank, may save you an expensive repair

Chris f
August 2021

I just bought a working BMR104 off Gumtree . Everything great until I plugged my phone into the aux input then the display went blank.
Here is my fix .. real weird, but it worked:

Switch on radio
Press Advanced button once
Press the volume/tuning knob once
Carefully rotate knob clockwise 6 clicks
Press knob once
Rotate knob clockwise 1 click
Press knob once

Wait. Radio now resets and retunes but display remains blank.

Switch off radio and back on.

Repeat the above procedure.

This time after resetting, the display springs into life and says something like “WAITING FOR PC WIZARD”

Switch off radio

Connect a PC to the micro USB socket
Switch on the radio, the display should now work.


CAREFUL! I repeated the fault by plugging my phone into the AUX jack again. The same process did not work a second time on the same PC USB port, but did work when plugged into a different USB port ... something to do with loading drivers??
Anyway see if it works for you

Phil W80
January 2020

Cheers yes I had found the manual but was hoping maybe some one could talk me through it if they had one was all. I've emailed them today and they said take it to a makita dealer which I probly will

Cheers for the help !

Lawson
February 2016

Manual here: http://www.free-instruction-manuals.com/pdf/pa_425507.pdf (30 seconds with Google search)

Reset instructions need data from the LCD, unfortunately. You MAY be able to do it "blind". See page 7.

Alternatively, you could try contacting Makita (Faecebook, Twatter or simply by email) and asking what to do.

XXX
February 2016